device; that this mill is more profitable to him than 80 acres of good
corn land, and that it is easily handled and has never been out of
order. The following report on one of these 16-foot mills, running in
northern Illinois, may be of interest: This mill stands between the
house and barn. A connection is made to a pump in a well-house 25 feet
distant, and is also arranged to operate a churn and washing machine. By
means of sheaves and wire cable, power is transmitted to a circular saw
35 feet distant. In this same manner power is transmitted to the barn
200 feet distant, where connection is made to a thrasher, corn-sheller,
feed-cutter, and fanning-mill. The corn-sheller is a three horse-power,
with fan and sacker attached. Three hundred bushels per day has been
shelled, cleaned, and sacked. The thrashing machine is a two horsepower
with vibrating attachment for separating straw from grain. One man has
thrashed 300 bushels of oats per day, and on windy days says the mill
would run a thrasher of double this capacity. The saw used is 18 inches
diameter, and on windy days saws as much wood as can be done by six
horses working on a sweep power. The owner furnishes the following
approximate cost of mill with the machinery attached and now in use on
his place:

1 16-foot power wind mill, shafting, and tower. $385
1 Two horse thrasher. 70
1 Three horse sheller. 38
1 Feed grinder. 50
1 18-inch saw, frame and arbor. 40
1 Fanning mill. 25
1 Force pump. 27
1 Churn. 5
1 Washing machine. 15
Belting, cables, and pulleys. 45