small consignment reached Dundee--now the Western home of the jute
industry. This quantity was imported into this country with the
special object of having it treated by mechanical means, much in the
same way as flax fibre was being treated. At this period Dundee was
a comparatively important textile centre in regard to the spinning
and weaving of flax and hemp; it was, in consequence, only natural
that the longer, but otherwise apparently similar and coarser, jute
fibre should be submitted to the machinery in vogue for the
preparation and spinning of flax and hemp. When we say similar, we
mean in general appearance; it is now well-known that there is a
considerable difference between jute fibre and those of hemp and flax,
and hence the modifications in preparation which had ultimately to
be introduced to enable the jute fibre to be successfully treated.
These modifications shall be discussed at a later stage.

It might be stated that while only 368 cwt. of jute fibre was
reported as being shipped from Calcutta to this country in 1828, the
imports gradually increased as time passed on. The yarns which were
made from the fibre were heavier or thicker than those in demand for
the usual types of cloth, and it was desirable that other types of
cloth should be introduced so that these yarns could be utilized.
About the year 1838, representatives of the Dutch Government placed
comparatively large orders with the manufacturers for jute bags to
be used for carrying the crop of coffee beans from their West Indian
possessions. The subsequent rapid growth of the industry, and the
demand for newer types of cloth, are perhaps due more to the above
fortunate experiment than to any other circumstance.

By the year or season 1850-51, the British imports of jute fibre had
increased to over 28,000 tons, and they reached 46,000 tons in the