** A Clothes Rack [14]

A clothes-drying rack that has many good features can be made as
shown in the illustration. When the rack is

[Illustration: Folding Clothes Rack]

closed it will fit into a very small space and one or more wings
can be used at a time as the occasion or space permits, and not
tip over. The rack can be made of any hard wood and the material
list is as follows:

1 Center post. 1-1/4 in. square by 62 in. 4 Braces. 1-1/4 in.
square by 12 in. 16 Horizontal bars. 1 by 1-1/4 by 24 in. 4
Vertical pieces. 1/4 by 1 by 65 in.

Attach the four braces for the feet with finishing nails after
applying a good coat of glue.

The horizontal bars are fastened to the vertical pieces with
rivets using washers on both sides. The holes are bored a little
large so as to make a slightly loose joint. The other ends of the
bars are fastened to the center post with round head screws. They
are fastened, as shown in the cross-section sketch, so it can be
folded up.
--Contributed by Herman Fosel, Janesville, Wis.