displacement due to the force is made smaller, and the losses are
reduced.

In most of the succeeding experiments I prefer, chiefly on account of
the regular and positive action, to employ the alternator before
referred to. This is one of the several machines constructed by me for
the purposes of these investigations. It has 384 pole projections, and
is capable of giving currents of a frequency of about 10,000 per
second. This machine has been illustrated and briefly described in my
first paper before the American Institute of Electrical Engineers, May
20, 1891, to which I have already referred. A more detailed
description, sufficient to enable any engineer to build a similar
machine, will be found in several electrical journals of that period.

The induction coils operated from the machine are rather small,
containing from 5,000 to 15,000 turns in the secondary. They are
immersed in boiled-out linseed oil, contained in wooden boxes covered
with zinc sheet.

I have found it advantageous to reverse the usual position of the
wires, and to wind, in these coils, the primaries on the top; this
allowing the use of a much bigger primary, which, of course, reduces
the danger of overheating and increases the output of the coil. I make
the primary on each side at least one centimetre shorter than the
secondary, to prevent the breaking through on the ends, which would
surely occur unless the insulation on the top of the secondary be very
thick, and this, of course, would be disadvantageous.

When the primary is made movable, which is necessary in some
experiments, and many times convenient for the purposes of adjustment,