The "Blackwall Hitch" (Fig. 45) is still simpler and easier to make
and merely consists of a loop, or cuckold's neck, with the end of rope
passed underneath the standing part and across the hook so that as
soon as pressure is exerted the standing part bears on the end and
jams it against the hook.

[Illustration: FIG. 45.--Blackwall hitch.]

The "Chain Hitch" (Fig. 46) is a very strong method of fastening a
line to a timber, or large rope, where one has a rope of sufficient
length, and is used frequently to help haul in a large rope or for
similar purposes. It consists simply of a number of half-hitches taken
at intervals around the object and is sometimes used with a lever or
handspike, as shown in Fig. 47. The "Rolling Hitch" is a modified
Clove hitch and is shown in Fig. 48. The "Magnus Hitch" (Fig. 49) is
a method frequently used on shipboard for holding spars; and the
"Studding-sail Bend" (Fig. 50) is also used for this purpose.
Occasions sometimes arise where a tackle, hook, ring, or another rope
must be fastened to a beam by the same rope being used, and in such
cases the "Roband Hitch" (Fig. 51) comes in very handy. These are all
so simple and easily understood from the figures that no explanation
is necessary. Almost as simple are the "Midshipman's Hitch" (Fig. 52),
the "Fisherman's Hitch" (Fig. 53), and the "Gaff Topsail Halyard
Bend" (Fig. 54). The midshipman's hitch is made by taking a half-hitch
around the standing part and a round turn twice around above it. The
fisherman's hitch is particularly useful in making fast large hawsers;
with the end of a rope take two turns around a spar, or through a
ring; take a half-hitch around the standing part and under all the
turns; then a half-hitch round the standing part only and if desired