The varieties of lashings, seizings, whippings, and servings are
almost innumerable, but a few of the best and most frequently used are
the "Wedding Knot" or "Rose Lashing," the "Deadeye Lashing," the
"Belaying-pin Splice," the "Necklace Tie," the "Close Band," and "End
Pointings." The rose lashing (Fig. 97) is used to join two eyes or
ropes finished with loops. The deadeye lashing (Fig. 98) is frequently
used on ships' standing rigging and is a familiar sight to every one
who has seen a sailing-vessel. It consists of a small line reeved back
and forth through the holes in the "deadeyes," _A_; the ends are then
seized to the standing rigging to prevent slipping. This lashing
admits of easy and rapid lengthening or shortening of the rigging and
is particularly useful in connection with wire cable. A similar method
may be used with loops instead of deadeyes (Fig. 99). The belaying-pin
splice, shown in Fig. 100, is a quick and handy way of fastening two
ropes together and is of great value when rigging is carried away and
some quick method of joining the severed ends is required. Pass a
belaying-pin or similar toggle through an eye or loop in one end of a
rope and pass this through a loop or eye in the broken rope end. Form
a loop in the other broken end, slip the free end of the lanyard
through this and around another toggle or pin and haul taut; then
fasten by half-hitches around standing part (_A_, Fig. 100), or by
seizing (_B_, Fig. 100). This is a strong, reliable fastening and can
be tightened up or instantly thrown off at will.

[Illustration: FIG. 97.--Rose lashing.]

[Illustration: FIG. 98.--Deadeye lashing.]

[Illustration: FIG. 99.--Loop lashing.]