a short splice. Do the same with strands _B_, _C_ and _F_, _G_;
dividing, knotting, and sticking the divided strands in the same way.
Finally stretch the rope tight, pull and pound and roll the splice
until smooth and round, and trim off all loose ends close to the rope.

[Illustration: FIG. 106.--Short splice.]

[Illustration: FIG, 106 _D_.--Short splice (continued).]

[Illustration: FIG. 107.--Long splice.]

An "Eye Splice" (Fig. 108) is very easy to make and is useful and
handy in a great variety of ways. It is made in the same manner as the
short splice, but instead of splicing the two ends together, the end
of the rope is unlaid and then bent around and spliced into its own
strands of the standing part, as shown in the illustration. A "Cut
Splice" (Fig. 109) is made just as an eye splice or short splice, but
instead of splicing two ropes together end to end, or splicing an end
into a standing part, the ends are lapped and each is spliced into the
standing part of the other, thus forming a loop or eye in the centre
of a rope. Once the short and long splices are mastered, all other
splices, as well as many useful variations, will come easy.
Oftentimes, for example, one strand of a rope may become worn, frayed,
or broken, while the remaining strands are perfectly sound. In such
cases the weak strand may be unlaid and cut off and then a new strand
of the same length is laid up in the groove left by the old strand
exactly as in a long splice; the ends are then tapered, stuck under
the lay, as in a short splice, and the repair is complete; and if well
done will never show and will be as strong as the original rope.