Carving and Serving by Mrs. D. A. Lincoln
page 21 of 52 (40%)
page 21 of 52 (40%)
![]() | ![]() |
|
incision through the thickest part, a little way from the smaller end.
Shave off in very thin slices, cutting toward the larger end and down to the bone at every slice. The knife should be very sharp to make a clean cut, and each slice should have a portion of the fat with the crisp crust. To serve it hot a second day, fill the cavity with a bread stuffing, cover it with buttered crumbs, and brown it in the oven. If it is to be served cold, brown the crumbs first and then sprinkle them over the stuffing. If this be done the edges will not dry and the symmetry of the ham is preserved. Carve as before, toward the larger end, and if more be needed, cut also from the other side of the bone. By filling the cavity again with stuffing, a ham may be served as a whole one the third time and look as inviting as when first served. Should there be two or three inches of the thickest end left for another serving, saw off the bone, lay the meat flesh side up, with the fat on the further side of the platter, and carve horizontally in thin slices. TONGUE. The centre of the tongue is the choicest portion. Cut across in slices as thin as a wafer. The tip of the tongue is more delicate when cut lengthwise in thin slices, though this is not the usual practice. CORNED BEEF. Corned beef should be put while hot into a pan or mould, in layers of fat and lean, with the fibres running the long way of the pan. After pressing it, place it on the platter and slice thinly from one end. This |
|