for the contact points in hook switches and similar uses in the
manufacture of telephone apparatus. Platinum is unquestionably the
best known material, on account of its non-corrosive and
heat-resisting qualities. Hard silver is the next best and is found in
some first-class apparatus. The various cheap alloys intended as
substitutes for platinum or silver in contact points may be dismissed
as worthless, so far as the writers' somewhat extensive investigations
have shown.

In the more recent forms of hook switches, the switch lever itself
does not form a part of the electrical circuit, but serves merely as
the means by which the springs that are concerned in the switching
functions are moved into their alternate cooperative relations. One
advantage in thus insulating the switch lever from the
current-carrying portions of the apparatus and circuits is that, since
it necessarily projects from the box or cabinet, it is thus liable to
come in contact with the person of the user. By insulating it, all
liability of the user receiving shocks by contact with it is
eliminated.

Wall Telephone Hooks. _Kellogg._ A typical form of hook switch, as
employed in the ordinary wall telephone sets, is shown in Fig. 83,
this being the standard hook of the Kellogg Switchboard and Supply
Company. In this the lever _1_ is pivoted at the point _3_ in a
bracket _5_ that forms the base of all the working parts and the means
of securing the entire hook switch to the box or framework of the
telephone. This switch lever is normally pressed upward by a spring
_2_, mounted on the bracket _5_, and engaging the under side of the
hook lever at the point _4_. Attached to the lever arm _1_ is an
insulated pin _6_. The contact springs by which the various electrical