Scientific American Supplement, No. 561, October 2, 1886 by Various
page 8 of 163 (04%)
page 8 of 163 (04%)
|
standing inside the box, at about the level of the floor, packs the
material neatly on the table. These presses can be worked with great rapidity, the average output during a day varying from 21 to 28 bales an hour. The consumption of coal per bale is 9 lb. of Bengal coal, in value about ¾d. The density of the cotton bales produced is about 45 lb. per cubic foot, 400 lb. measuring a little under 9 cubic feet for shipment. In the case of jute or jute roots, the same weight occupies 10 cubic feet on an average. But rapid as this press is in action, the necessities of recent business in India have called for still more expeditious working, and to meet this demand Mr. Watson produced his compound press, in which the economy of time is carried to its utmost development. By the addition of a second pair of long-stroke rams the output of the press has been trebled, being raised to 80 bales per hour. To effect this, there is one pair of powerful rams, as in the press just described, but two pairs of the long-stroke rams. Further, each pair of the small-diameter rams is fitted with two boxes, one of which is always being filled while the other is being pressed. The rams in rising compress the material into a small cell or box, situated above the box in which raw cotton is thrown. On the top of the ram head there is a loose lashing plate, which, at the finish of the action of the rams, is locked in the cell by bolts actuated by a suitable locking gear. While in this cell the bale has the lashing ropes put round it, and then it is placed under the large rams for the final squeeze, during which the ties or ropes are permanently secured. Thus neither of the small presses has even to wait while its box is being filled, or while the previously pressed bale is being lashed. Even in the large press, when the ties are finally fastened, the time occupied does not exceed three-quarters of a minute, and is often much |
|