How to Camp Out by John Mead Gould
page 61 of 125 (48%)
page 61 of 125 (48%)
![]() | ![]() |
|
door-flap to the opposite breadth, and a second set outside pulls
together the two selvages of the centre breadths. Do not slight this work: a half-closed door, short tapes, and a door-flap that is slapping all the time, are things that will annoy you beyond endurance. The upright poles of a tent such as has been described should be an inch or two more than seven feet, for the cloth will stretch. If you have a sod-cloth, the poles should be longer still.[18] THE WALL-TENT. The wall-tent is shaped like a house: the walls or sides, which are perpendicular, are four feet high. A continuous piece of cloth runs from the ground to the eaves, thence on toward the ridgepole, and down the other side to the ground. The tent is made on the same general principles as the one last described. It is four breadths square, but the width is usually diminished about one foot by cutting six inches from each corner breadth. If the cloth is drilling or light duck, you can overlap the centre breadths a foot, and thus have the doors ready-made. Draw a plan upon the floor as in the other case; the pole nine feet and two inches high, the corners four breadths apart less the overlappings and the narrowing; draw the wall (in the plan only) four feet and two inches high. The roof-line runs of course from the top of the pole to the top of the wall. Cut the cloth, as before, so as to have the twilled side out. Add six inches to the distance measured on the plan, for the length of the walls |
|