Make the horse on legs of iron, strong and well set on a good
foundation; then grease it and cover it with a coating, leaving each
coat to dry thoroughly layer by layer; and this will thicken it by
the breadth of three fingers. Now fix and bind it with iron as may
be necessary. Moreover take off the mould and then make the
thickness. Then fill the mould by degrees and make it good
throughout; encircle and bind it with its irons and bake it inside
where it has to touch the bronze.

OF MAKING THE MOULD IN PIECES.

Draw upon the horse, when finished, all the pieces of the mould with
which you wish to cover the horse, and in laying on the clay cut it
in every piece, so that when the mould is finished you can take it
off, and then recompose it in its former position with its joins, by
the countersigns.

The square blocks _a b_ will be between the cover and the core, that
is in the hollow where the melted bronze is to be; and these square
blocks of bronze will support the intervals between the mould and
the cover at an equal distance, and for this reason these squares
are of great importance.

The clay should be mixed with sand.

Take wax, to return [what is not used] and to pay for what is used.

Dry it in layers.