material. Start with the front of the book. Be sure that all
sections are in their right places and that the flyleaves are
provided in the front and back. Take the sections of the flyleaves
on top, which should be notched the same as the saw cuts in the
book sections, and place them against the strings in the frame.
Place the left hand on the inside of the leaves where they are
folded and start a blunt needle, threaded double, through the
notch on the left side of the string No. 1 in Fig. 2. Take hold of
the needle with the right hand and pass it to the left around the
string No. 1, then back through the notch on the right side.
Fasten the thread by tying or making a knot in the end and passing
the needle through it. After drawing the thread tightly, pass the
needle through the notch on the left side of the string No. 2,
passing it around the string and tying in the same manner as for
No. 1. Each section is fastened to the five strings in the same
manner, the thread being carried across from each tie from No. 1
to 2 then to 3 and so on

[Illustration: Frame for Sewing Sections]

until all strings are tied. The string No. 5 is treated in the
same manner only that the needle is run through on the left side
of the string a second time, leaving the needle on the outside in
position for the next section, which is fastened the same as the
first, the needle being passed through the notch on the right side
of the string No. 5, and then to string No.4, passing around on
the right side and back on the left and so on. Keep the thread
drawn up tightly all the time.

After the sewing is completed cut the strings, allowing about 2