in. of the ends extending on each side. The fibers of these ends
are separated and combed out so that they can be glued to the
covers to serve as a hinge. A piece of cheesecloth is cut to the
size of the back and glued to it. Ordinary liquid glue is the best
adhesive to use.

Procure heavy cardboard for the covers and cut two pieces 1/2 in.
longer and just the same width as the magazine pages. The covering
can be of cloth, leather or paper according to the taste and
resources of the maker. The covering should be cut out 1 in.
larger on all edges than both covers and space on the back. Place
the cardboard covers on the book, allowing a margin of 1/4 in. on
all edges except the back, and measure the distance between the
back edges of the covers across the back of the book.

Place the cardboard covers on the back of the covering the proper
distance apart as measured for the back, and mark around each one.
Spread thin coat of glue on the surface of each and lay them on by
the marks made. Cut a notch out of the covering so it will fold
in, and, after gluing

[Illustration: The Bound Book]

a strip of paper to the covering between the covers to strengthen
the back, fold over the outside edges of the covering and glue it
down all around.

Place the cover on the book in the right position, glue the hinges
fast to the inside of the covers, then glue the first flyleaf to
the inside of the cover on both front and back and place the whole