Theory of Silk Weaving - A Treatise on the Construction and Application of Weaves, and the Decomposition and Calculation of Broad and Narrow, Plain, Novelty and Jacquard Silk Fabrics by Arnold Wolfensberger
page 40 of 83 (48%)
page 40 of 83 (48%)
 | |
|
2. #Length and width of the cloth.# 3. #The stock and the dyeing thereof.# 4. #Reed calculation# (number of dents and ends per inch and total number of dents required). 5. #Drawing-in the warp in harness and reed.# 6. #Texture and arrangement of warp# (warping ticket) 7. #Arrangement of harness.# 8. #Reduction of filling.# 9. #Calculation of warp and filling.# 10. #Finishing.# 11. #Calculation of cost.# [Page 68] 1. THE WEAVE If a given sample is to be reproduced or imitated, it must be analyzed, and the following hints will greatly facilitate this operation to the beginner. Cut the sample straight on two sides, and draw out a number of warp and filling threads until there is a small fringe of perhaps ΒΌ of an inch. This |
|
