Book-bot.com - read famous books online for free

Debian GNU/Linux : Guide to Installation and Usage by John Goerzen;Ossama Othman
page 40 of 298 (13%)
on page [*]. The numbers may not be the same, but the Flags and FS Type
column shoulds be similar.

Until now, nothing on your disk has been altered. If you are satisfied
that the partition scheme you created is what you want, press the
left-arrow key until ``Write'' is highlighted, and press Enter. Your hard
disk has now been partitioned. Quit the cfdisk application by selecting
the ``Quit'' menu selection. Once you have left cfdisk, you should be back
in Debian's dbootstrap installation application.

Figure 3.1: cfdisk screenshot
\resizebox*{4in}{!}{\includegraphics{images/cfdisk.eps}}

Initialize and Activate a Swap Partition

This will be the ``Next'' menu item once you have created one disk
partition. You have the choice of initializing and activating a new swap
partition, activating a previously-initialized one, or doing without a
swap partition.

A swap partition is strongly recommended, but you can do without one if
you insist and if your system has more than 4MB RAM. If you wish to do
this, select the ``Do Without a Swap Partition'' item from the menu and
move on to the next section.

It's always permissible to reinitialize a swap partition, so select
``Initialize and Activate a Swap Partition'' unless you are sure you know
what you are doing. This menu choice will first present you with a dialog
box reading ``Please select the partition to activate as a swap device.''
The default device presented should be the swap partition you've already
DigitalOcean Referral Badge